<span id="35ndr"></span>

    <noframes id="35ndr"><address id="35ndr"><form id="35ndr"><nobr id="35ndr"></nobr></form></address>
      <address id="35ndr"><address id="35ndr"></address></address><noframes id="35ndr"><form id="35ndr"></form>

      <noframes id="35ndr"><form id="35ndr"><th id="35ndr"></th></form>
      <address id="35ndr"><address id="35ndr"></address></address>

      加入收藏设为首页联系我们

      欢迎光临广州市通骏机械设备有限公司官方网站!

      信誉第一,质量至上注重工作细节,提高服务品质

      全国24小时服务热线 :
      400-7728-317

      当前位置:首页 > 产品展示 > 气动点(凸)焊 > TMF系列中频逆变直流点(凸)焊机

      ?

      产品详细

      中频逆变直流点焊机
      发布者: 发布日期:2018-10-20 16:43:47
      TMF系列中频逆变直流(凸)焊机
      TMF Series Medium Frequency Inverter DC Spot welding Machine
      特点及用途
      1、通电时间短、热效率高、可有效抑制焊接飞溅、获得稳定高品质的焊接效果,焊接成型美观。
      2、控制精度高,中频点焊机由于工作频率高(通常在1-4KHz),使得反馈控制精度是一般交流点凸 焊机和次级整流点凸焊机的20-80倍,相应的输出控制精度也非常高。
      3、逆变点焊机采用三相输入,宜于电网供电平衡,无须电力补偿设备,对电网无干扰。
      4、由于热效率高、焊接变压器小、铁损小,焊接同样的工件比交流点焊机和次级整流点焊机节能可达30%以上。
      5、特别适合于导电率较高的铜、铝和镀锌金属等材料,焊接效果良好,尤其适合于三层板焊接、非常薄的材料的焊接以及精密焊接的要求。
      Main Features:
      1.Current time is short, high thermal efficiency, which can effectively inhibit welding spatter, stability of high quality welding effect, beautiful welding forming
      2.Control precision is high, intermediate frequency spot welding machine due to the high working frequency (usually in 1-4 KHZ), the feedback control precision is general ac point convex welder and secondary rectifier point convex welder 20-80 times, the corresponding output is also very high control precision.
      3.Inverter spot welding machine adopts three-phase input, like the balance of power supply, no power compensation equipment, no interference of power grids
      4.Energy saving: due to the high thermal efficiency, small welding transformer, welding inverter and small iron loss, welding the same artifacts, than ac spot welding machine and secondary rectifying spot welding machine and energy saving can reach more than 30%
      5.Wide applicability: can welding materials such as copper, aluminum, and galvanized metal, welding effect is good.Three layer board is especially suitable for welding, welding material is very thin, and the requirements of precision welding
       
      主要技术参数 Main Technical Parameter
       
      参数/型号
      Parameter/model
      TMF-50KVA TMF-90KVA TMF-150KVA TMF-170KVA TMF-250KVA TMF-300KVA
      额定电源
      Rated/Voltage
      3相,交流电(AC),380------415-----480V,50/60HZ
      额定容量
      Rated/Capacity
      50KVA 90KVA 150KVA 170KVA 250KVA 300KVA
      额定占截率
      Rated Duty Cycle
      50% 50% 50% 50% 50% 50%
      最大焊接电流
      Max Welding Current
      18500A 23500A 32000A 40500A 56500A 80000A
      电极行程
      Electrode Stroket
      75MM 100MM
      电极臂间距
      Welding Arm Spacing
      260MM 320MM
      气源压力
      Air Source Pressure
      0.6MPa
      冷却水流量
      Cooling Water Flow
      16L/Minute 25L/Minute 35L/Minute 45L/Minute

      想要了解更多关于自动闪光对焊机的信息,请点击:http://www.canada-eg.com
      上一篇:中频逆变直流点焊机
      下一篇:返回列表
      网络快三